Technical Data Connection Options
Operating temp: - 20 ...+ 60 degrees C Cable 2 meters Connector- 4 ...+ 140 degrees F + Loop A # 1 1 (White, for 2xAB) Any type of connector with more than 4 pins and an IP rating of 66 can be used, pin allocations will determined by end customer. More than one connector is possible as well.
Max frequency: 5 kHz - Loop A # 1 2 (Blue, for 2xAB)
Weight: 53 oz (1.5 kg) + Loop B # 1 3 (Yellow, for 2xAB)
Protection: IP 66M, NEMA 4 - Loop B # 1 4 (Green, for 2xAB)
Housing: Aluminum + Loop O # 1 5
Shaft: Stainless Steel - Loop O # 1 6
Bearings: 2 x 6807 ZZ Optional
Torque: 0.8 oz/in (6 N-cm) + Loop A # 2 Violet, for 2xAB
Shaft load: Supports its own weight - Loop A # 2 Orange, for 2xAB
Humidity: Up to 98% permissible + Loop B # 2 Pink, for 2xAB
Speed: Resolution dependant - Loop B # 2 Brown, for 2xAB
Max. ppr 512
Output for Channels A&B and O Output for 2 x A&B Channels (italic green above)
| Certifications |
Best suited to work with the following isolators: (can be purchased from us as well) Isolator Data Sheet [MTL5015] - DIN rail mounting - 151£ Isolator Data Sheet [MTL4013] - Backplane mounting - 146£ |
| IP 66M |
| II 1G Ex ia II C T4 and/or I M1 Ex ia I |
| ATEX [Certificate] |
| IECEx [Certificate] |
| UL [Certificate] |
| Mounting Instructions |
| Thread the encoder shaft onto the matching threaded shaft and tighten both ends. Add a bit of copper slip for it not to seize up. To keep encoder from rotating: have a pin to prevent rotation in one of the mounting holes, or a bracket bolted onto the mounting holes, or simply tie wrap the cable. Whatever is done, ensure there is a bit of play between encoder and mounting arrangement to prevent bearing damage. Hook up the encoder with the connections as described. Make sure power supply meets specifications. |
| Dimensions |
